Forsiden

  Om oss

  Produkter
  ANALOGT - Platespillere, RIAA, Tonearmer, Pickuper mm...
  ELEKTRONIKK - Forsterkere, CD spillere, DACer mm...
  HØYTTALERE
  HODETELEFONER
  BLACK MAGIC CABLES
  RØRPRODUKTER
  MØBLER - Rack og Stativer
  Audio - Kontakter
  Audio - kabler
  Lyd & Bilde - Kabler
  Strømkabler
  Strømkontakter
  Strømfordelere / Strømfilter
  Sikringer
  Spesialprodukter
  Vibrasjonsdemping
  Akustikk / Rom
  Behandling av plater
  PROFF
  PAKKELØSNINGER
  Gjør det selv (DIY )
 

  Plater & Musikk

  Nyheter

  Tilbud/Kampanjer

  Dagens tilbud

  Demo/Brukt

  Tester

  Priser

  Nedlasting

  Dagens tema

  Hos kunder

  Hos leverandører

  Messer/Arrangement

  Våre lytterom


  Forhandlere

  Vilkår: kjøp & salg

  Kontakt oss





Du har valgt en produktkategori som ikke lenger eksisterer...

SOLITAIRE

ELEKTRONIKK - Forsterkere, CD spillere, DACer mm... / / METAXAS & SINS
Produktbeskrivelse
Stereo Effektforsterker

Bestill her     Pris: 360250,-

Tester og omtaler
[ Nye METAXAS: METAXAS & SINS ]

Info
The Solitaire is a straight 150WRMS Stereo Power Amplifier or can be delivered like the IKARUS as a higher powered [150WRMS]
Stereo Integrated Amplifier.

It best embodies the sculptural design and “lack-of-sound” philosophy of Metaxas & Sins.
After over 35 years of work in the fi eld of High End Audio, from the design and manufacturing of entire playback systems to the recording of over 300 acoustic concerts to gain further musical insights, the last thing that artist-designer Kostas Metaxas wanted to produce was “another box with transistors on a heatsink”.

Kostas was dreaming of the most spectacular architecture, design and sculpture he had experienced and wanted to bring that
emotional intensity, daring and seductive beauty to an audio amplifier.
As a recording engineer, Metaxas also wanted to “voice it” for extremely realistic recording playback, to be able to reproduce all
the nuance and emotion of a musical performance.
His new SOLITAIRE is the result. Machined from a solid block of either aircraft aluminium, copper or titanium, it’s totally bespoke and the modular electronics make it future-proof. Even the circuit boards can be CNC machined from 1mm solid silver coated clear polystyrene.
From the sensual, organic and striking casework [inspire by the stunning work in Sports cars of the 1950’s/60’s of Ercole Spada, as well as the architecture of Hadid, Gehry and Calatrava] to absolutely every part of the amplifi er including the circuit, topology, layout and casework has been developed by Kostas Metaxas. It is the logical evolution of his groundbreaking design concepts pioneered in the early 1980’s.
Then, it true “Bugatti fashion”, each and every amplifi er is assembled by the master or his sins — either Andreas or Alessandros Metaxas.

The individually 5-axis CNC’d “sculptural” enclosure presents a very heavy, solid, inert, non-resonant structure to RFI shield and
ultimately protect the delicate electronic signals, driving the noise floor to ultra-ultra-low levels, revealing a wealth of detail that has never been heard before.

1. INPUT STAGE:
The fully complementary, dual differential, cascaded input stage is linearised to ensure least distortion over the large voltage swings to the amplifier input from the preceeding preamplifi er. A very gradual (6dB/octave) Bessel fi lter is incorporated at the input to eliminate the needless reproduction of Radio Frequencies.
The second voltage gain stage uses considerable local feedback to ensure that large voltage swings from the input stage are
accommodated with the least possible distortion.
An overall negative feedback of only 11dB is required to stabilise the complete D.C. operating point and reduce distortion at full power to below 0.01% T.H.D. which is primarily composed of second harmonics. A D.C. servo is built around an integrated circuit to monitor the output voltage and ensure absolute D.C. stability.

2. OUTPUT STAGE:
Our triple Darlington output stage uses the fastest power transistors
we could source, but sadly no longer available since the factory in Japan was destroyed by a Tsunami. Fortunately, we purchased large
stocks of these devices 30 years ago.
Our printed circuit design borrows techniques from RF and UHF groundplane technology to maximise the speed of current delivery,
especially at high frequencies.

3. POWER SUPPLY INPUT & OUTPUT STAGE:
The input voltage gain stage of the SOLITAIRE is isolated via the high-current output stage via a two stage’capacity-multiplier’ circuit which uses the beta of the transistors to multiply the
filtering effect of the capacitor used.

The simplicity of this circuit eliminates an
output bypassing capacitors which would otherwise reduce the apparent speed and degrade the sound quality of this amplifier.

4. PROTECTION CIRCUITS: To eliminate the sonic colourations imposed by sophisticated current limiting protection circuits, the
SOLITAIRE uses only the short M205 fuse types to protect the high current stages. Apart from the fuses, a four pole relay is in series with the solid silver binding posts. If over 0.6VDC is sensed at the amplifier output, the relay is activated until the condition is rectifi ed.

Specifications

FREQUENCYRESPONSE : DC - 5.0MHz (-3dB)

POWER OUTPUT: 150WRMS per channel into 8 Ohms with no more than 0.05% T.H.D.

DAMPING FACTOR : Greater than 500 wide band

SLEW RATE : Greater than 1000V/us small and large signal

T.H.D. : Less than 0.05% 20Hz-20KHz

I.M.D. (S.M.P.T.E.) : Less than 0.05%

SIGNAL/NOISE : -117DBV unweighed input shorted

SENSITIVITY: 0.5VRMS in for 150WRMS out (28dB)

INPUT IMPEDANCE : 100kOhms in parallel with 11pF

bildenavn


bildenavn




Spesifikasjoner:




  PM Auduio AS - Prestebakken 26, 4645 Nodeland - post@pmaudio.no - 38 18 31 15 / 91 71 36 55
Websiden er utviklet av Yada Webdesign DA - © Copyright 2005